Posted by WD on February 26, 2000 at 01:20:53:
In Reply to: WD can you do me a favor and.... posted by SOJu dAVE on February 25, 2000 at 19:12:22:
The best place to glass in a box would be the rear most section of the seat. The stock rider seat has a small notch in the underside where it mates up to the p-pad. I would simply hold the regulator in this gap, trace around it, push it in until flush, measure the size of the wall you need. Make walls (3) out of heavy fiberglass matting and lots of resin. Use more glass mat and resin to affix to the seat pan. Reupholster the seat lip in the color of your choice. If you feel you'll have trouble with all this, I'll do it for $150, two week turn around. It may seem a good bit on the expensive side, but I do my work right.
-WD